Zum Hauptinhalt springen

Starting Validator

Configure Renec CLI#

The renec cli includes get and set configuration commands to automatically set the --url argument for cli commands. For example:

renec config set --url https://api-mainnet-beta.renec.foundation:8899

Confirm The Cluster Is Reachable#

Before attaching a validator node, sanity check that the cluster is accessible to your machine by fetching the transaction count:

renec transaction-count

Generate identity#

Create an identity keypair for your validator by running:

renec-keygen new -o ~/validator-keypair.json

The identity public key can now be viewed by running:

renec-keygen pubkey ~/validator-keypair.json

Note: The "validator-keypair.json” file is also your (ed25519) private key.

See Paper Wallet Usage for more info.

Your validator identity keypair uniquely identifies your validator within the network. It is crucial to back-up this information.

If you don’t back up this information, you WILL NOT BE ABLE TO RECOVER YOUR VALIDATOR if you lose access to it. If this happens, YOU WILL LOSE YOUR ALLOCATION OF RENEC TOO.

To back-up your validator identify keypair, back-up your "validator-keypair.json” file or your seed phrase to a secure location.

More Renec CLI Configuration#

Now that you have a keypair, set the renec configuration to use your validator keypair for all following commands:

renec config set --keypair ~/validator-keypair.json

You should see the following output:

Config File: /home/renec/.config/renec/cli/config.yml
RPC URL: http://api-mainnet-beta.renec.foundation:8899
WebSocket URL: ws://api-mainnet-beta.renec.foundation:8899/ (computed)
Keypair Path: /home/renec/validator-keypair.json
Commitment: confirmed

Create Authorized Withdrawer Account#

If you haven't already done so, create an authorized-withdrawer keypair to be used as the ultimate authority over your validator. This keypair will have the authority to withdraw from your vote account, and will have the additional authority to change all other aspects of your vote account. Needless to say, this is a very important keypair as anyone who possesses it can make any changes to your vote account, including taking ownership of it permanently. So it is very important to keep your authorized-withdrawer keypair in a safe location. It does not need to be stored on your validator, and should not be stored anywhere from where it could be accessed by unauthorized parties. To create your authorized-withdrawer keypair:

renec-keygen new -o ~/authorized-withdrawer-keypair.json

Create Vote Account#

If you haven’t already done so, create a vote-account keypair and create the vote account on the network. If you have completed this step, you should see the “vote-account-keypair.json” in your Renec runtime directory:

renec-keygen new -o ~/vote-account-keypair.json

The following command can be used to create your vote account on the blockchain with all the default options:

renec create-vote-account ~/vote-account-keypair.json ~/validator-keypair.json ~/authorized-withdrawer-keypair.json

Remember to move your authorized withdrawer keypair into a very secure location after running the above command.

Read more about creating and managing a vote account.

Connect Your Validator#

Connect to the cluster by running (this configuration is for testnet):

~/.local/share/renec/install/active_release/bin/renec-validator \
--identity ~/validator-identity.json \
--vote-account ~/validator-vote-account.json \
--enable-rpc-transaction-history \
--enable-cpi-and-log-storage \
--require-tower \
--dynamic-port-range 8000-8020 \
--entrypoint 52.21.244.146:8001 \
--expected-genesis-hash 7PNFRHLxT9FcAxSUcg3P8BraJnnUBnjuy8LwRbRJvVkX \
--full-rpc-api \
--log -

To force validator logging to the console add a --log - argument, otherwise the validator will automatically log to a file.

The ledger will be placed in the ledger/ directory by default, use the --ledger argument to specify a different location.

Confirm your validator is connected to the network by opening a new terminal and running:

renec gossip

If your validator is connected, its public key and IP address will appear in the list.

Controlling local network port allocation#

By default the validator will dynamically select available network ports in the 8000-10000 range, and may be overridden with --dynamic-port-range. For example, renec-validator --dynamic-port-range 11000-11020 ... will restrict the validator to ports 11000-11020.

Limiting ledger size to conserve disk space#

The --limit-ledger-size parameter allows you to specify how many ledger shreds your node retains on disk. If you do not include this parameter, the validator will keep the entire ledger until it runs out of disk space.

The default value attempts to keep the ledger disk usage under 500GB. More or less disk usage may be requested by adding an argument to --limit-ledger-size if desired. Check renec-validator --help for the default limit value used by --limit-ledger-size. More information about selecting a custom limit value is available here.

Systemd Unit#

Running the validator as a systemd unit is one easy way to manage running in the background.

Assuming you have a user called renec on your machine (remember replace all /home/renec to /home/{your_os_user}), create the file /etc/systemd/system/renec.service with the following:

[Unit]
Description=RENEC Daemon
After=network.target
[Service]
User=renec
Group=renec
Environment=SOLANA_METRICS_CONFIG=host=http://metrics.renec.foundation:8086,db=mainnet-beta,u=write,p=39018931781680558
Environment=RUST_LOG=info
ExecStart=/home/renec/.local/share/renec/install/active_release/bin/renec-validator --identity /home/renec/validator-identity.json --vote-account /home/renec/validator-vote-account.json --enable-rpc-transaction-history --enable-cpi-and-log-storage --require-tower --dynamic-port-range 8000-8020 --entrypoint 52.21.244.146:8001 --expected-genesis-hash 7PNFRHLxT9FcAxSUcg3P8BraJnnUBnjuy8LwRbRJvVkX --full-rpc-api
StandardOutput=append:/home/renec/renec-validator.log
StandardError=append:/home/renec/renec-validator-error.log
Restart=on-failure
# Specifies which signal to use when killing a service. Defaults to SIGTERM.
KillMode=process
KillSignal=SIGINT
TimeoutStopSec=300
RestartSec=10s
[Install]
WantedBy=default.target

Start the service with:

$ sudo systemctl enable renec.service
$ sudo systemctl start renec.service

Advance configurations#

Enabling CUDA#

If your machine has a GPU with CUDA installed (Linux-only currently), include the --cuda argument to renec-validator.

When your validator is started look for the following log message to indicate that CUDA is enabled: "[<timestamp> renec::validator] CUDA is enabled"

System Tuning#

Linux#

Automatic#

The renec repo includes a daemon to adjust system settings to optimize performance (namely by increasing the OS UDP buffer and file mapping limits).

The daemon (renec-sys-tuner) is included in the renec binary release. Restart it, before restarting your validator, after each software upgrade to ensure that the latest recommended settings are applied.

To run it:

sudo $(command -v renec-sys-tuner) --user $(whoami) > sys-tuner.log 2>&1 &

Known validators#

If you know and respect other validator operators, you can specify this on the command line with the --known-validator <PUBKEY> argument to renec-validator. You can specify multiple ones by repeating the argument --known-validator <PUBKEY1> --known-validator <PUBKEY2>. This has two effects, one is when the validator is booting with --only-known-rpc, it will only ask that set of known nodes for downloading genesis and snapshot data. Another is that in combination with the --halt-on-known-validators-accounts-hash-mismatch option, it will monitor the merkle root hash of the entire accounts state of other known nodes on gossip and if the hashes produce any mismatch, the validator will halt the node to prevent the validator from voting or processing potentially incorrect state values. At the moment, the slot that the validator publishes the hash on is tied to the snapshot interval. For the feature to be effective, all validators in the known set should be set to the same snapshot interval value or multiples of the same.

It is highly recommended you use these options to prevent malicious snapshot state download or account state divergence.

Logging#

Log output tuning#

The messages that a validator emits to the log can be controlled by the RUST_LOG environment variable. Details can by found in the documentation for the env_logger Rust crate.

Note that if logging output is reduced, this may make it difficult to debug issues encountered later. Should support be sought from the team, any changes will need to be reverted and the issue reproduced before help can be provided.

Log rotation#

The validator log file, as specified by --log /home/renec/renec-validator.log, can get very large over time and it's recommended that log rotation be configured.

The validator will re-open its when it receives the USR1 signal, which is the basic primitive that enables log rotation.

If the validator is being started by a wrapper shell script, it is important to launch the process with exec (exec renec-validator ...) when using logrotate. This will prevent the USR1 signal from being sent to the script's process instead of the validator's, which will kill them both.

Using logrotate#

An example setup for the logrotate, which assumes that the validator is running as a systemd service called renec.service and writes a log file at /home/renec/renec-validator.log:

# Setup log rotation
cat > logrotate.renec <<EOF
/home/renec/renec-validator.log {
rotate 7
daily
missingok
postrotate
systemctl kill -s USR1 renec.service
endscript
}
EOF
sudo cp logrotate.renec /etc/logrotate.d/renec
systemctl restart logrotate.service

As mentioned earlier, be sure that if you use logrotate, any script you create which starts the renec validator process uses "exec" to do so (example: "exec renec-validator ..."); otherwise, when logrotate sends its signal to the validator, the enclosing script will die and take the validator process with it.

Disable port checks to speed up restarts#

Once your validator is operating normally, you can reduce the time it takes to restart your validator by adding the --no-port-check flag to your renec-validator command-line.

Using a ramdisk with spill-over into swap for the accounts database to reduce SSD wear#

If your machine has plenty of RAM, a tmpfs ramdisk (tmpfs) may be used to hold the accounts database

When using tmpfs it's essential to also configure swap on your machine as well to avoid running out of tmpfs space periodically.

A 300GB tmpfs partition is recommended, with an accompanying 250GB swap partition.

Example configuration:

  1. sudo mkdir /mnt/renec-accounts
  2. Add a 300GB tmpfs parition by adding a new line containing tmpfs /mnt/renec-accounts tmpfs rw,size=300G,user=renec 0 0 to /etc/fstab (assuming your validator is running under the user "renec"). CAREFUL: If you incorrectly edit /etc/fstab your machine may no longer boot
  3. Create at least 250GB of swap space
  • Choose a device to use in place of SWAPDEV for the remainder of these instructions. Ideally select a free disk partition of 250GB or greater on a fast disk. If one is not available, create a swap file with sudo dd if=/dev/zero of=/swapfile bs=1MiB count=250KiB, set its permissions with sudo chmod 0600 /swapfile and use /swapfile as SWAPDEV for the remainder of these instructions
  • Format the device for usage as swap with sudo mkswap SWAPDEV
  1. Add the swap file to /etc/fstab with a new line containing SWAPDEV swap swap defaults 0 0
  2. Enable swap with sudo swapon -a and mount the tmpfs with sudo mount /mnt/renec-accounts/
  3. Confirm swap is active with free -g and the tmpfs is mounted with mount

Now add the --accounts /mnt/renec-accounts argument to your renec-validator command-line arguments and restart the validator.

Account indexing#

As the number of populated accounts on the cluster grows, account-data RPC requests that scan the entire account set -- like getProgramAccounts and SPL-token-specific requests -- may perform poorly. If your validator needs to support any of these requests, you can use the --account-index parameter to activate one or more in-memory account indexes that significantly improve RPC performance by indexing accounts by the key field. Currently supports the following parameter values: